Bird Barrier Bird-Flite Stainless Steel Bird Spikes Metal Pins Strips with Plastic Base Clear Glue Adhesive Included - Narrow (2.5in) 100 Ft. Length

- ? LOW VISIBILITY … Bird-Flite’s polycarbonate base and Bird Barrier Bond glue are clear, while the thin, stainless steel bird spikes for small birds are hard to see even from short distances. - ? EASY TO INSTALL … Simply glue or screw the spike base in place! The one-foot strips snap into smaller sections and can be bent to accommodate any architectural configuration. - ? NO DEBRIS … Bird-Flte’s upward pointing spikes are 1.5” apart -- far enough to be a pigeon repellent and designed to prevent debris like paper and twigs from getting trapped. - ? HUMANE … Bird-Flight pigeon spikes are blunted to avoid injury to birds or unsuspecting workmen. Since birds typically hover before landing, they are deterred and left unharmed - ? PUT AN END TO BIRD DAMAGE … Protect your property from the build up of acidic droppings and nests that damage buildings and vehicles, clogging gutters and vents.

Product description

Made With a Polycarbonate Base & Stainless Steel Spikes!

Remember, spikes are not for nesting birds!

Bird Barrier has been providing products to stop birds since 1993. The company's products are installed on thousands of buildings and homes across North America and beyond.

Bird Barrier's products are made from high-quality, long lasting material that are designed to blend in with the building so they don't create an eyesore. The products are humane, their only goal is to make birds feel unwelcome and take their mess elsewhere

Where to Use: Ledges, parapets caps, roof peaks, chimneys, etc. Bird Pressure: Medium (Do not use where birds are nesting). Installation Level: Easy. Base is glued or screwed to any surface. Make sure that you have permission to penetrate the surface.

Bird-Flite Bird Spikes are available in three-foot lengths for fast application. The base can be cut easily with snips or shears. It curves gently or takes hard bends to conform to the building's features.

The 1-foot lengths can be snipped into smaller sections. Simply pick your size then glue or screw down!

Bird-Flite spikes are blunted to avoid injury to birds or unsuspecting workmen. Since birds typically hover before landing, they are deterred and left unharmed.

The polycarbonate base allows for Bird-Flite spikes to be bent with ease. There's no location where these spikes can't go!

Birds have a natural instinct to reclaim their spots. Nests in particular have a lot of pheromones that the bird uses to recognize their home. This is what we call imprinting. When you put spikes over their nesting sites, birds will build right over them. As you can see in this photo, it doesn't matter how many spikes were placed. The resident birds we're going to reclaim their spot. Remember, don't use spikes to solve nesting birds! Failures like this one are one of the most common problems we see in the bird control industry. Use a deterrent that specifically states that it can be used for nesting!